The data rate of I2C is ___________
1.1Mbps
2.2Mbps
3.3Mbps
4.4Mbps
What are the applications of a UART?
1.Bluetooth modules
2.GPS units
3.Microcontrollers
4.All of the above
What is the standard form of UCR?
1.UART Control Register
2.USART Common Register
3.USART Control Register
4. None of the above
Which one of the following registers is a most significant byte of a universal asynchronous receiver transmitter baud rate generator value?
1.DLL
2.DLM
3.both (a) and (b)
4.None of These
An UART used for _______ access
1.Mainframe
2.Internet
3.both (a) and (b)
4.None of These
How many lines does I2C use between multiple slaves and multiple masters?
1.One
2.Two
3.Three
4.Four
In a UART, the maximum possible number of devices in a bus is ___________
1.Two
2. Unlimited
3.Four
4.Eight
In I2C, the maximum possible number of devices in a bus is _________
1.6
2.4
3.10
4.127
In SPI, the maximum possible number of devices in a bus is ___________
1.Unlimited
2.Two
3.Eight
4.Several
The associated protocol for serial interface RS-422 is ___________ UART I2C SPI
1.UART
2.SPI
3.12C
4.None of These
The data rate of an SPI is __________
1.10Mbps
2.25Mbps
3.40Mbps
4.50Kbp
The master unit is ______ in UART
1.Variable
2.Fixed
3.Variable or fixed
4.None of These
The master unit is ______ in USB 2.0
1. Variable
2.Fixed
3.Variable or fixed
4.None of These
The maximum cable length of RS-232 is ___________
1. 1.2km
2.1.5km
3.9km
4.10km
The maximum cable length of USB is ______
1.1.2km
2.1.5km
3.9km
4. 30km
The maximum distance of a UART is ___________
1.10 m
2.12 m
3.15 m
4.29 m
The maximum distance of I2C is ____________
1.1m
2.2m
3.0.5m
4.12m
The maximum distance of RS-485 is _________
1. 1.2km
2.15km
3.9km
4.10km
The maximum distance of SPI is ___________
1.0.1m
2.12m
3.15m
4.29m
The maximum speed of a UART is ___________
1.115Kbps
2.1Kbps
3.115.2Kbps
4.1.2Kbps
The maximum speed of an SPI is ___________
1.115Kbps
2.4Mbps
3.115.2Kbps
4.1.2Kbps
The maximum speed of I2C is ___________
1.15Kbps
2.4Mbps
3.115.2Kbps
4.1Mbps
The maximum speed of RS-485 is ________
1.15Kbps
2.4Mbps
3.115.2Kbps
4.1Mbps
The maximum throughput of an Ethernet is _____________
1. 20KB/sec
2.125MB/sec
3.28.8KB/sec
4.10KB/sec
The maximum throughput of RS 232 is _____________
1.20KB/sec
2.2KB/sec
3. 28.8KB/sec
4.10KB/sec
The product availability of RS-232 is _____________
1.>500
2.<1000
3. >10,000
4.None of these
The speed of SCSI is ______
1. 160M bytes/sec
2.1M bytes/sec
3.2M bytes/sec
4.4M bytes/sec
The speed of USB is ______
1.12M bit /sec
2.1M bit /sec
3.2M bytes/sec
4.4M bytes/sec
The transmitter type of I2C is _______
1.Synchronous
2.Asynchronous
3.Both a and b
4.None of the above
The transmitter type of SPI is __________
1.Synchronous
2.Asynchronous
3.Both a and b
4. None of the above
The UART 16550A has ____________FIFO buffers
1.2-byte
2.4byte
3.8-byte
4.16-byte
The UART transmitter consists of ___________
1. FIFO module
2.Shift register
3.Hold register
4.All of the above
What is the standard form of DUDRE?
1.Dual UART Data Register Empty
2.Digital UART Data Register Empty
3.Data UART Data Register Empty
4.None of These
What is the standard form of MCR?
1.Modem Control Register
2.Modem Control Receiver
3.Modem Common Register
4.None of These
What is the standard form of MDR?
1.Modem Definition Register
2. Mode Definition Receiver
3.Module Data Register
4.None of These
What is the standard form of MSR?
1.Modem Status Register
2.Mode Simple Receiver
3.Module Data Register
4.None of These
What is the standard form of PCON?
1.Power Control
2.Power Control Receiver
3.Power Control Register
4.None of These
What is the standard form of UARTFR?
1.UART Flag Register
2.USART Flag Register
3.UART Register
4.None of These
What is the standard form of UBRR? None of the above
1.UART Baud Rate Register
2.USART Baud Rate Register
3.USART Baud Register
4.None of the above
What is the standard form of UDRE?
1.UART Data Register Empty
2.UART Data Register
3.USART Data Register Empty
4.None of these
What is the standard form of USR?
1.UART Serial Register
2.UART Status Register
3.USART Simple Register
4.None of the above
Which one of the following is a write-only register?
1. FCR
2.IIR
3.both (a) and (b)
4.None of the above
Which one of the following registers is a least significant byte of a universal asynchronous receiver transmitter baud rate generator value?
1.DLL
2.DLM
3.both (a) and (b)
4.None of these
Which one of the following scalability is high?
1. I2C
2.UART
3.SPI
4.None of the above
Which one of the following scalability is low?
1.UART
2.SPI
3.12C
4.None of the above
Which register contains the data to be transmitted?
1.RBR
2.THR
3.FCR
4.None of the above
Which register contains the data which is recently received?
1.RBR
2.THR
3.FCR
4.None of These
Which register controls the universal asynchronous receiver transmitter frame formatting?
1.RBR
2.THR
3. FCR
4.LCR
Which register is used to disable/enable the transmission?
1.TER
2.THR
3.FCR
4.LCR
________ are the revision identification registers
1.REVID1
2.REVID2
3.Both A and B
4.None of the above